DAM-3

Discrete Automation Module Type 3 (DAM-3)

Features and BenefitsDAM-3

  • Ideal for Low Leakage and Shock Sensitive Applications
  • 8 Solid-State Form A Relays
  • 2 Solid-State Form B Relays
  • 10 Digital Inputs
  • Integrated User Interface (Push Buttons and Displays)
  • Fully Sealed Enclosure (NEMA 4X, 6, 13 Protection)
  • -40°C to +65°C (-40°F to +149°F) Operating Range
  • MIL-STD-901D for High Impact Shock
  • MIL-STD-167B for Vibration
  • MIL-STD-461E for Electro-Magnetic Interference (EMI)
  • Powerful and easy-to-use graphical programming
  • Logic and Batch Control
  • Supports Hot Swapping

The Chameleon Discrete Automation Module (DAM-3) offers high-performance logic and batch control. The DAM-3 module contains ten digital inputs, ten solid-state relay outputs, four user-programmable push-buttons, and eight useraddressable tri-color LEDs that are software configurable. It is powered by an ARM processor with onboard RAM and flash memory providing sufficient computational power to handle the most demanding applications. As with all Chameleon modules, DAM-3 modules are hot-swappable and field upgradeable.

The DAM-3 module offers unique features generally not available in competing controller designs. Both its ten universal digital inputs and ten solid-state outputs are capable of accepting a broad range of AC and DC signals with no reconfiguration or rewiring required. The digital outputs consist of eight Form A normally open (NO) relays and two Form B normally closed (NC) relays.

The DAM-3 module uses an isolated wiring configuration for the solid state relays. Each relay has dedicated terminals with 1240V isolation that allow the user to mix AC and DC power connections on an individual basis. Digital inputs are grouped into two banks that provide the ability to mix high voltage and low voltage input signals.

DAM-3 modules have convenient label holders that can be associated with the programmable LEDs and push buttons.  Multiple DAM3 modules can be combined to expand I/O capacity and to provide redundant I/O connections. They can also be combined with other Chameleon modules to form a full-featured programmable automation controller.

 

ENVIRONMENTAL CHARACTERISTICS
Operating Ambient Temperature Range -40°C to 65°C
Storage/Transport Ambient Temperature Range -40°C to 85°C
High Impact Shock MIL-STD-901D, Grade A
Mechanical Vibration MIL-STD-167B
Electro-Magnetic Interference MIL-STD-461E
Facial/Housing Protection NEMA 1,2,4,4X,5,6,6P (Pending),12,12K,13
AC Power Compatibility (I/O)  MIL-STD-1399 300
DIGITAL INPUTS
Quantity 10
Maximum Allowable Continuous Input Voltage 80 VDC or 155 VAC RMS
Logic High Voltage Range 5-80 VDC or 24-155 VAC RMS 55-500 Hz
Logic Low Voltage Range 0-1 VDC or 0-0.5 VAC RMS 55-500 Hz
Minimum Input Duration For Logic Low Detection 56 ms
Minimum Input Current Required (AC and DC inputs) 5mA RMS
Electrical Isolation: 2 banks of 5 inputs
  • Digital Input to Digital Output, Control Circuitry or Chassis Ground
 1240 VRMS for 1 minute
  • Digital Input Bank to Digital Input Bank
 1240 VRMS for 1 minute
DIGITAL OUTPUTS
Quantity / Type 8 Form “A” Solid-State Relays
2 Form “B” Solid-State Relays
Mode Close Time / Open Time 3 ms typical / 3 ms typical
Voltage Rating 155 VAC Inductive or Resistive, 28VDC Resistive (DC Inductive Loads Require External Clamp)
Form “A” Closed Resistance 0.7 Ω max at 25°C, 1 Ω max at 65°C
Form “B” Closed Resistance 1.2 Ω max at 25°C, 1.9 Ω max at 65°C
Form “A” Open Max Leakage Current 200 μA max at 65°C
Form “B” Open Max Leakage Current 100 μA max at 65°C
Form “A” Maximum Allowed Continuous Current (Any Single Relay) 155VAC/200VDC, 0.5 Amp SSRs
Form “B” Maximum Allowed Continuous Current (Any Single Relay) 155VAC/200VDC, 0.5 Amp SSRs
Electrical Isolation
  • Digital Input to Digital Output, Control Circuitry or Chassis Ground
1240 VRMS for 1 minute
  • Digital Input Bank to Digital Input Bank
1240 VRMS for 1 minute
ELECTRICAL CHARACTERISTICS
Maximum Module Power Consumption 1.3W + 0.03 W/mA x (current draw from aux. power source) + 0.05 W / relay x (number of relays in use)
Maximum Allowable Auxiliary Output Current 250mA
Real-Time Clock Battery Life(Minimum; No power applied, 25°C)

10 Years

Supported Cable Diameters Two glands 0.24”-0.47” and six glands 0.16”-0.31”
Supported Wire Gauges

16-28 AWG

OPERATOR INTERFACE
Digital Readouts Eight user programmable three-color (red/yellow/green) LEDs with label holders
Push-Buttons Four user-programmable on/off buttons with label holders
Status Readout One three-color (red/yellow/green) LED Indicator
IR Wireless Interface 115kbps SIR
PHYSICAL CHARACTERISTICS
Weight 2.3 lbs
Front Panel Dimensions 4” W x 6” L
Enclosure Height 3″ H

The following part numbers can be used when ordering the Chameleon Discrete Automation Module (DAM-3).

The following base module part numbers include the enclosure with EMI wiring glands, active board, and wiring hub:

Fairmount Part Number

Description

DAM-3 or 01012-072

Chameleon Discrete Automation Module (Type 3)

Spare/Replacement Parts:

Fairmount Part Number

Description

11093-200 Chameleon Discrete Automation Module (DAM-3) Active Board And Cover — Replacement faceplate for DAM-3
11095-100 Chameleon Discrete Automation Module (DAM-3) Isolated Relay Wiring Hub Assembly — Replacement W/H for DAM-3